SKU: 25176900150
sulfate fertilizer for plants

sulfate fertilizer for plants Ammonium Sulfate 4 LB – Custom Hydro

Sale price$22.31 Regular price$24.79
Save 10%

Pay in installments of $6.20 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 2 - Aug 7

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

sulfate fertilizer for plants Ammonium Sulfate 4 LB – Custom HydroSoluGreen (21 0 0 with 24% sulfate) water soluble ammonium sulfate fertilizer SoluGreen is double screened, creating a very uniform SGN (approximately 100) with the lowest heavy metal content. We use only virgin oleum sulfuric acid in the manufacturing process, which makes our product extremely soluble as compared to cheaper spent or merchant grade sulfuric acid products. That is why SoluGreen has the lowest heavy metal content in the industry.

SoluGreen (21-0-0 with 24% sulfate) water soluble ammonium sulfate fertilizer

SoluGreen is double screened, creating a very uniform SGN (approximately 100) with the lowest heavy metal content. We use only virgin oleum sulfuric acid in the manufacturing process, which makes our product extremely soluble as compared to cheaper spent or merchant grade sulfuric acid products. That is why SoluGreen has the lowest heavy metal content in the industry. Organics are removed before SoluGreen crystallizes, resulting in a non foaming product.

This very fine water soluble NITROGEN and SULFUR fertilizer can be used on areas where you already have high levels of phosphorus and potassium. This fertilizer can be used on Lawns, Gardens, Flowers, Shrubs, Hedges, and Trees. Listed below are general guidelines for using our SOLUGREEN AMMONIUM SULFATE.

1 Cup = 0.5 Lbs. ?1 Quart = 2 Lbs.? 1 Gallon = 8 Lbs.

ESTABLISHED TURF:

apply 5-7 lbs per 1000 square feet. Topdress and water in 4-5 lbs per 1000 square feet every 8-10 weeks as needed during the growing season. To avoid fertilizer burn, never apply the fertilizer to wet grass and always water in after the application. This greens grade fertilizer is very fine and you will need to calibrate your spreader. Start out by setting your spreader to only 20 percent of maximum opening and see how many square feet 5 lbs covers, then adjust accordingly. Many turf managers apply this product dissolved in water. With this method you must apply at a much lower nitrogen rate due to the fact that fertilizer is a salt and can cause severe burning if over applied especially during hot temperatures. Most have been applying around 0.2 lbs of actual N per 1000 square feet every 14-21 days. For example if 50 lbs of Solugreen is dissolved in 100 gallons of water, then applying 1.9 gallons per 1000 square feet would equal 0.2 lbs of actual Nitrogen. With this foliar method, use at your own risk!. Always irrigate with sufficient water to reduce the possibility of fertilizer injury. Avoid application during mid day when temperatures are high.

GARDEN:

In the spring apply and incorporate just before planting 10 lbs per 1000 square feet of Solugreen Fertilizer. Topdress and water in another 4-5 lbs per 1000 square feet of Solugreen Fertilizer four to five weeks later on high nitrogen crops such as corn, potatoes, and onions. However, do not topdress your tomatoes, squash, watermelons, and especially beans.

FLOWERS:

Apply 0.5 pounds per 100 square feet (10 X 10 feet) and work well into soil before planting. Apply an additional 0.5 pound per 100 square feet every 12 weeks, mixing lightly with topsoil, making sure not to disturb the roots. Water thoroughly after each fertilizer application. SHRUBS AND HEDGES: Apply in the spring, after danger of a killing frost is past, 0.5 pounds per 100 square feet (10 X 10 feet) and work lightly into the soil, making sure not to disturb the roots. Water thoroughly after application. Repeat this application in early summer.

SHADE TREES and/or FRUIT AND NUT TREES:

For an under the tree limb surface fertilizer application, apply 0.5 pounds per inch of the trunk’s diameter. Measure the trunk diameter five feet from the ground. Apply this fertilizer rate in early spring and again in late summer. 

Hydroponics/Drip Irrigation:

May be used as a source of amonium and sulfur as a component in a complete nutrient formula. Please Use in accordance with recommendations of a qualified individual or institution such as, but not limited to, a certified crop advisor, agronomist, university crop extension publication, or apply according to recommendations in your approved nutrient management plan.

One gram in one gallon of water yields approx: 56 ppm Ammonium Nitrogen and 64 ppm sulfate.

Elemental concentration range in common nutrient solutions:

Nitrogen: 70-250ppm  Sulfur: 20-200ppm

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 25176900150

Discover Niche Categories That Outsell sulfate fertilizer for plants

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 14 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Silver
Carnegie, US
★★★★★ 5
Works great as advertised
Style: Printer & Inks, Style: Printer & Inks
Working great so far! Enjoying starting doing sublimation work. A rookie a few weeks in and it's going well. Print quality is decent. Not having paper jam issues. Was easy to setup. I had to goto Epson and download a current print driver to get all the print properties and printer settings I needed. Was easy. After I installed the 2nd driver and saw it worked better, then I uninstalled the 1st epson driver. Helped allow for 8.5 x 14 page size and high quality. Just a few options needed that were not showing on the original print driver. Took me a few days to figure out what was going on. It helped with the quality of the prints after I got the better driver. So the end product is better also.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 23, 2026
S
Verified Purchase
Shark
Whiting, US
★★★★★ 5
Prints great, wifi was an issue
Style: Printer & Inks
Got the printer a week ago and have printed something every day so far and the quality of the prints have been fantastic. Arrived and set up without any major issues, other than not being able to connect to my local wifi. Had to get an Ethernet cable to connect to it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2026
S
Verified Purchase
S. Robson
Waukegan, US
★★★★★ 5
Good printer
Style: Printer & Inks
It is working well for sublimation. No issues so far.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 4, 2026
C
Verified Purchase
claudia
Bozeman, US
★★★★★ 5
Easy to assemble and quality
Style: Printer & Inks, Style: Printer & Inks
Using my printer almost everyday since Im starting on a sublimation project and I just love it. The printing quality look good The set up was easy and for now Is working 100%
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026
N
Verified Purchase
Nadiagne
New York, US
★★★★★ 5
Great 🥰
Style: Printer & Inks, Style: Printer & Inks
The Epson F170 has been ideal for getting started with sublimation. It's easy to use, prints vibrant and defined colors, and has allowed me to personalize various projects with excellent results. As a beginner, it has given me a lot of confidence to learn and create without complications. I definitely recommend it for anyone starting out in sublimation.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2026

recommand products